Catalogue Tajima
Fils a broder
Outils de cerclage
Consommables
Accessoires de broderie
Les bonnes affaires
Précédent
Suivant
Nettoyant Adhésif DK5 - 500 ml
8,52 € TTC
7,10 € HT
ODIF DK5 cleans glue residues from a wide range of surfaces such as needles, scissors, edging frames, machines and cutting mats.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
ODIF DK5 cleans glue residues from a wide range of surfaces such as needles, scissors, edging frames, machines and cutting mats.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
Derniers articles en stock
- Livraison J+1 pour toute commande avant 14H, sous réserve de disponibilité
- Livraison offerte Franco de port pour toute commande de 370€ht, hors produits volumineux
- Toutes les données sont cryptées et sécurisées.
- Nos experts vous assistent par téléphone 04 42 62 41 40
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla et consectetur urna, eu euismod ante. Praesent commodo magna vel lectus posuere, vel malesuada nulla bibendum.
ODIF DK5 cleans glue residues from a wide range of surfaces such as needles, scissors, edging frames, machines and cutting mats.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
Spray onto the surface to be treated from a distance of approx. 25 cm. Allow to work for at least 30 seconds. Remove residue with a cloth.
* Persistent residues (very thick adhesive, infrequent cleaning, etc.): repeat application.
If necessary, use a brush to help the solvent penetrate the various coats.
* To reduce cleaning time to just a few minutes, use it regularly.
* Mechanisms that may heat up or produce sparks: before restarting, ventilate the treated area well
and remove excess with compressed air or the JET 400.
* Lubricate needle bars, hooks and bearings after each cleaning.
Commentaires (0)
Aucun avis n'a été publié pour le moment.
Documentation à télécharger
Questions fréquentes
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla et consectetur urna, eu euismod ante. Praesent commodo magna vel lectus posuere, vel malesuada nulla bibendum.
Vous avez d’autres questions ?
Contactez nos experts qui répondront à tous vos questionnements rapidement.
Questions fréquentes
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla et consectetur urna, eu euismod ante. Praesent commodo magna vel lectus posuere, vel malesuada nulla bibendum.
Vous avez d’autres questions ?
Contactez nos experts qui répondront à tous vos questionnements rapidement.
Vous pourriez aimer
Précédent
Suivant